Circuit de Barcelona-Catalunya

Revised Front Wing Endplate The front wing endplate has been modified, resulting in an improvement of aerodynamic flow conditioning and subsequently enhanced aerodynamic overall performance.

Revised front wing footplate with new vanes arrangement and endplate diveplane addition, optimized wing elements spanwise loading distribution.

New SM mechanism links and integration in the nose, revised nose shape with raised lower surface Evolution of the front wing platform raced so far, with enhanced tip flow features coming with front wheel wake control benefits as well as increased aero balance capacity. More integrated SM mechanism links returns tidier centre line flow features. It also comes with flap lips modulation.

Reduced keel volume.

Redesigned front floor leading edge profiles and claws, front floor board elements optimisation (horizontal and vertical ones). Optimisation of rearward floor corner winglets, reprofiling of diffuser sidewall cutout. Updated diffuser winglet angle of attack and diffuser / tail expansion profile Benefiting from an improved onset flow quality, this entire floor update is targeting overall aerodynamic load increase across the main car operating window as well as flow features robustness improvements together with improved flow topology and energy towards the rear corners

Inflated sidepod shoulder and adapted cokeline This geometry has been developed in conjunction with the floor update and manipulates front wheel wake together with the floor board update, as well as the rebalancing the front floor pressurisation

SM Fairing Winglets and Third Element local extensions Different SM fairing geometry with added winglets offering local load for high downforce tracks.

Local trailing edge extensions added on the rear wing third element for efficient load increase.

Updated diffuser profile & integration with rear crash structure

Provides improved aerodynamic flow conditioning at the back of the car, to aid with efficient load generation from the floor.

Simplified Rear Impact Structure geometry An alternative Rear Impact Structure device will be available on track, enabling targeted tuning of the car’s characteristics for this circuit.

Addition of SLM actuator fairing Reintroduction of an SLM mechanism fairing to the updated Rear Wing that was first introduced at the previous event, to re-instate the availability of low drag mode on this wing

Extra flap gurney options available Additional front wing load is generated by adding Gurney flaps to the trailing edge.

This provides extended balance range for the car for setup optimisation during the weekend.

Small winglets added on centreline to rear wing.

These winglets increase the camber of the upper rear wing on centreline, generating downforce and drag at a ratio attractive for this event.

Addition of cooling louvres to upper surface of rear Sidepod The addition of louvres to the upper surface of the rear sidepod has been implemented to increase the power unit cooling range